← Back

All Projects

Things I have built and worked on.

  1. FAST-LIO point-cloud map built from a simulated Livox HAP
    Livox Lidar Gazebo Simulation for ROS 2

    Livox Mid-360 and HAP lidar simulation for Gazebo Harmonic and ROS 2 Jazzy, with the real non-repetitive scan pattern, per-point timing and datasheet noise.

  2. Scout, a 3D-printed quadruped robot with exposed wiring on a lab bench
    Scout: A Custom Low-cost Quadruped Platform

    A low-cost ROS 2 quadruped built on OpenQuadruped, with custom electronics and a custom RL-trained gait. Built from cheap parts, in the same price range as OpenQuadruped, and tested in Gazebo and on the real robot.

  3. TurtleBot3 exploring turtlebot3_world in Gazebo, with the RRT tree, frontier clusters and planned path overlaid
    RRT-based Exploration of Unknown Environments

    A ROS Noetic package that grows RRTs on the SLAM occupancy grid to find frontiers, clusters and filters them, and sends the best one to move_base. Runs on a TurtleBot3 with gmapping.

  4. Simulated multicopter in AirSim with depth, segmentation and camera views
    Reinforcement Learning for Agile Path Planning of Multicopters

    A multicopter simulation in Unreal Engine, AirSim and OpenAI Gym, with PPO-trained recovery that regains control and hovers after signal loss or motor failure, and semantic segmentation for obstacle perception. Also built a physical quadcopter with a Jetson, ZED stereo camera and Pixhawk running PX4 for sim-to-real testing.

  5. Top-down view of the Civilbot four-wheeled rover and its onboard electronics
    Civilbot

    A low-cost four-wheeled ROS rover for testing lidar mapping and navigation, using the ROS Navstack and Hector mapping with a differential drive. Also tested a ZED stereo camera through the ZED Open Capture library.

  6. Directory tree of the .dotfiles NixOS flake
    Declarative NixOS System Configuration

    My personal NixOS configuration, a declarative flake-based setup for my laptop, home server and dev environment.

  7. Transistor-level VLSI layout of the parity checker, with PMOS and NMOS devices between the VDD and VSS rails
    Low-Area 4-bit Parity Checker and Sequence Comparator in VLSI

    A 4-bit even parity checker at 180 nm, with its XOR gates cut down from the standard 8-transistor form to a transmission-gate version and then a three-transistor design (5.947 µW), with the output transistor's W/L ratio tuned to limit threshold-drop degradation. Also a D flip-flop sequence comparator, written in gate-level Verilog, that flags inputs that differ over four consecutive clock cycles.

  8. Measurement histogram where the state 101 appears about 953 times out of 1000
    Amplitude Amplification for Boolean Expression Evaluation

    A Qiskit implementation of Grover-style amplitude amplification that finds the unique solution of a three-variable Boolean satisfiability problem in two iterations, with a measured probability of 0.953 in simulation. Uses O(√N) oracle calls against O(N) classically, and outlines how to adapt the oracle and the iteration count to other problems.